Standard Linear Guides – Dẫn hướng tuyến tính tiêu chuẩn

Standard Linear Guides – Dẫn hướng tuyến tính tiêu chuẩn

Standard Linear Guides - Dẫn hướng tuyến tính tiêu chuẩn

Miniature Linear Guides – Wide Rails – Standard Blocks, Light Preload / Slight Clearance

The most basic type among all the industry standard specifications

Linear Guides for Heavy Load – Normal Clearance

Linear Guides for Heavy Load – With Plastic Retainers, Interchangeable, Light Preload

Miniature Linear Guides – Wide Rails – Standard Blocks, Light Preload / Slight Clearance

The industry standard Wide Rails, Standard Blocks

Linear Guides for Medium Load – Normal Clearance

Linear Guides for Super Heavy Load – Normal Clearance / C-VALUE

Select C-VALUE Products for medium-accuracy positioning, medium/low load, and medium-to-low frequency drive application

All Ball LM Guide, World Standard, HSR Type

A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: “2, 4, 6…”
Required shafts: 3 3(-III)⇒ Order quantity: “3, 6, 9…”
Please place your orders in this manner.

Linear Guides for Medium/Heavy Load – Stainless Steel – Normal Clearance

Linear Guides for Medium/Heavy Load – With Dowel Holes, Normal Clearance

Linear Guides for Medium Load – Stainless Steel – With Plastic Retainers, Interchangeable, Light Preload

Select C-VALUE Products for medium-accuracy positioning, medium/low load, and medium-to-low frequency drive application.

Miniature Linear Guides – Standard Blocks with Dowel Holes, Light Preload / Slight Clearance

Ball retainer with LM guide Radial Type SSR shape

Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: “2, 4, 6…”
Required shafts: 3 3(-III)⇒ Order quantity: “3, 6, 9…”
Please place your orders in this manner.

Linear Guides for Medium Load – With Plastic Retainers, Interchangeable, Light Preload

Ball retainer with LM guide Miniature SRS shape

A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: “2, 4, 6…”
Required shafts: 3 3(-III)⇒ Order quantity: “3, 6, 9…”
Please place your orders in this manner.

Linear Guides for Extra Super Heavy Load – With Plastic Retainers, Interchangeable, Light Preload

Linear Guides for Medium/Heavy Load – With Dowel Holes, Normal Clearance

Linear Guide MSA Series

Miniature Linear Guides – Heat Resistant – Short / Standard / Long Blocks, Light Preload

[Block only]Ball retainer with LM guide World standard SHS shape

An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.
·
· Cross-section

All-Ball LM Guide, Radial, SR Type

A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
· The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
· It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
· LM block, LM rail, and LM rail are all compatible with stainless steel.

Miniature Linear Guides – Dust Resistant – Standard Blocks, Light Preload

All Ball LM Guide, World Standard, HSR Type

A best selling THK product. The HSR series can be used in any position.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: “2, 4, 6…”
Required shafts: 3 3(-III)⇒ Order quantity: “3, 6, 9…”
Please place your orders in this manner.

Linear Guides for Super Heavy Load – With Plastic Retainers, Interchangeable, Light Preload

Linear Rail System SBI-HL/HLL Series

[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.

* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: “2, 4, 6…”
Please place your orders in this manner.

LM Guide Block – Standard TRS-V Type (Block Unit)

Linear Guides with Low Temperature Black Chrome Plating

Linear Guides for Heavy Load – Dust Resistant – With Double Seals / Metal Scrapers, Normal Clearance

Linear Guides for Heavy Load – Stainless Steel – With Plastic Retainers, Interchangeable, Light Preload

Ball retainer with LM guide World standard SHS shape

A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: “2, 4, 6…”
Required shafts: 3 3(-III)⇒ Order quantity: “3, 6, 9…”
Please place your orders in this manner.

[Block only]Ball retainer with LM guide Radial Type SSR shape

An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.
· , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

Linear Guides for Extra Super Heavy Load – Normal Clearance / C-VALUE

Select C-VALUE Products for medium-accuracy positioning, medium/low load, and medium-to-low frequency drive application

All ball LM guide miniature RSR shape

A miniature type with a compact structure. Can be mounted in space saving areas.

[Features]
· RSR/RSR-W type circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with two rows that have been precision ground into the LM block and LM rail.
· The ball circulates and moves in the compact structure, which allows it to move on an infinite straight line with no restrictions on stroke.
· The LM block has been designed into a shape that allows for rigidity to be obtained when there is limited space, and is combined with a large diameter ball in order to obtain high rigidity in all directions.
· Ultra compact: A compact linear system that is highly reliable because there is no mis
alignment in the cages that are prone to problems in the ball sliding limited stroke type or in the cross roller guide.
Can withstand load in all directions: Incurs load in all directions, and can adequately use a single shaft guide for small moment loads.
· In particular, the RSR-W type that has an increased number of effective balls to increase the LM rail width to achieve increased rigidity against moments, and two parallel linear brush shafts can be used to achieve a linear motion with excellent durability and a compact size.
· Stainless steel LM block, LM rail, and LM rail are all compatible with stainless steel.

[Block only]All Ball LM Guide, World Standard, HSR Type

An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.

Linear Rail System SBI-SL/SLL Series

[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.

* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: “2, 4, 6…”
Please place your orders in this manner.

Ball Retainer SME Series

Miniature Linear Guides – Wide Rails – Standard Blocks with Dowel Holes, Light Preload

Linear Rail System SBI-SV Series

[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.

* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: “2, 4, 6…”
Please place your orders in this manner.

LM Guide Standard TRH-F Type (Rail+Block Set)

Linear Rail System SBI-CL/CLL Series

[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.

* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: “2, 4, 6…”
Please place your orders in this manner.

H-Type Eco Guide (EGH, EGH-L Series)

[Features]
· Comes standard equipped with a side seal to improve the dust-proofing performance. You can expect longer life expectancy out of this product due its ability to even further prevent foreign object infiltration.
· Can achieve weight reduction for the rail by revising the height and cross-section shape.
· The lubricant performance has been improved beyond that of conventional products by revising the grease supply path and using a design that allows grease to accumulate in the ball circulation path.
· Equipped with complete compatibility for fitting the bearing with the rail. Can achieve reduced assembly times.
· No need to fret because the balls included in the bearings have a structure that will not allow them to fall out.
· We have standardized the rail length in order to be able to support all rail lengths and to have a symmetrical mount hole pitch location.
· Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

Linear Guides for Medium Load – Dust Resistant – With Double Seals / Metal Scrapers, Normal Clearance

HSR-M1VV for total Ball LM Guide, World Standard, medium and low vacuum use

Can be used in environments with a wide range of atmosphere to vacuum (0.001[Pa]). Uses dedicated parts with newly developed tools and grease. Can be used in baking temperatures of up to 200°C.

[Features]
· Can be used in environments with a wide range from atmosphere to vacuum (10-3[Pa]).
· Can be used in baking temperatures of up to 200°C*.
· The newly developed labyrinth end rail that is dedicated for medium to low vacuums has improved grease holdability, and can be used for long periods of time under a vacuum.
· Achieve a stable rolling resistance using the newly developed grease for medium to low vacuums.
· * Please multiple the temperature coefficient by the basic rated load when the baking temperature exceeds 100°C.
· The LM guide for medium to low vacuums demonstrates an excellent vacuum reachable degree.
· The grease that is used on the medium to low vacuum LM guide has a lower rolling resistance compared with fluorine grease that is used in normal vacuums, and can obtain a consistent rolling motion.
· Specimen: HSR15M1RVV temperature: 25°C (±5°C) Pressure: Atmospheric Pressure

Miniature Eco Guide (EGM, EGM-L Series)

[Features]
· All of the parts are comprised of either stainless steel or plastic, which makes this ideal for use in environments that do not tolerate rust.
· Can achieve reduced weight and the most compact design allowable, which is ideal for high speed operation.
· The ball rolling surface has been designed into a gothic arch shape that can withstand a high load capacity, which can sustain a long life.
· Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

Miniature MSD Series

[Block only]All-Ball LM Guide, Radial, SR Type

An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.

[Features]
· Circulates the ball row using the end plate that is assembled
· in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.