Support Units – Cụm phụ trợ
Support Units-Fixed Side/Square
Support Units-Support Side/Square
Support Units-Fixed Side/Round
Support Units/Square/Support Side/Low Profile
Support Units-Fixed Side/Square/Low Profile Type
Support Units-Support Side/Round
BK Series Support Unit
[Features]
The HIWIN support unit is comprised of a main body, bearing, cover spacer, oil seal, lock nut, and a bolt with a hex hole. The support unit is used on the support side and the fixed side of each screw shaft, which makes it possible to place the screw shaft in the correct position. The compact size makes it easy to mount and can be used in narrow spaces. Additionally, an adequate amount of grease has already been sealed within the bearing to adjust it to the optimal state for use so that it can immediately be installed on your machine as-is and reduce assembly operation time and improve the assembly accuracy and consistency.
[Special color]
· Combined with a high accuracy, high rigidity angular ball bearing
· The entire surface has received an anti-rust treatment.
· The compact size makes it easy to mount and be used in narrow spaces.
· No additional treatment is required so it can immediately be mounted on equipment as-is.
· Various types and sizes available for selection.
· HIWIN We provide services that are tailored to customer requirements and we can also ship … together with a ball screw.
Support Units – Fixed Side, Square – Integrated AC Servo Motor Bracket
Support Units-Support Side/Square/Retaining Ring
Support Units-Fixed Side/Square/Compact
SUPPORT UNITS – ANGLE TYPE FOR SUPPORT/ AF TYPE
Support Units-Fixed Side/Round/Economy
Support Unit for Small Device Load Fixed Side Support Unit (round)
The high rigidity angular ball bearing has been adjusted to the optimal preload on the fixing side, and this has been assembled while sealing the optimal amount of grease within.
SUPPORT UNITS – ANGLE TYPE FOR FIXTURE/ AK TYPE
Support Units-Fixed Side/Square/Mounting Hole Narrow Pitch/C-Value
SUPER LOAD Support Unit on Fixed Side – WBK Type
EF Series Support Units
[Features]
The HIWIN support unit is comprised of a main body, bearing, cover spacer, oil seal, lock nut, and a bolt with a hex hole. The support unit is used on the support side and the fixed side of each screw shaft, which makes it possible to place the screw shaft in the correct position. The compact size makes it easy to mount and can be used in narrow spaces. Additionally, an adequate amount of grease has already been sealed within the bearing to adjust it to the optimal state for use so that it can immediately be installed on your machine as-is and reduce assembly operation time and improve the assembly accuracy and consistency.
[Special color]
· Combined with a high accuracy, high rigidity angular ball bearing
· The entire surface has received an anti-rust treatment.
· The compact size makes it easy to mount and be used in narrow spaces.
· No additional treatment is required so it can immediately be mounted on equipment as-is.
· Various types and sizes available for selection.
· HIWIN We provide services that are tailored to customer requirements and we can also ship … together with a ball screw.
SUPPORT UNITS – ANGLE TYPE FOR FIXTURE/ BK TYPE
Support Units-Fixed Side/Square/Economy
Support Units-Fixed Side/Round/C-Value
SUPPORT UNITS – FACTORY MACHINERY/ TAC TYPE
Support Units-Fixed Side/Square/With Dowel Holes
Support Units-Support Side/Round/Retaining Ring
SUPPORT UNITS – CIRCLE TYPE FOR FIXTURE/ FK TYPE
Precision Collars for Support Units
Support Units – Fixed Side, Round – Fixed Side Radial Bearing Type (Economical, for Low Speed Applications)
Support Units – Fixed Side, Square – Fixed Side Radial Bearing Type (Economical, for Low Speed Applications)
Support Units-Support Side/Square/C-Value
Support Units-Support Side/Square/Mounting Hole Narrow Pitch/C-Value
Support Unit for Small Device Light Load Fixed Side Support Unit (square)
The high rigidity angular ball bearing has been adjusted to the optimal preload on the fixing side, and this has been assembled while sealing the optimal amount of grease within.
Support Unit for Support Side (square) (for small device light load)
Utilizes a high rigidity thrust angular ball bearing that has the ideal structure and functionality.
FK Series Support Units
[Features]
The HIWIN support unit is comprised of a main body, bearing, cover spacer, oil seal, lock nut, and a bolt with a hex hole. The support unit is used on the support side and the fixed side of each screw shaft, which makes it possible to place the screw shaft in the correct position. The compact size makes it easy to mount and can be used in narrow spaces. Additionally, an adequate amount of grease has already been sealed within the bearing to adjust it to the optimal state for use so that it can immediately be installed on your machine as-is and reduce assembly operation time and improve the assembly accuracy and consistency.
[Special color]
· Combined with a high accuracy, high rigidity angular ball bearing
· The entire surface has received an anti-rust treatment.
· The compact size makes it easy to mount and be used in narrow spaces.
· No additional treatment is required so it can immediately be mounted on equipment as-is.
· Various types and sizes available for selection.
· HIWIN We provide services that are tailored to customer requirements and we can also ship … together with a ball screw.
Support Units with Damper-Fixed Side/Dowel Holes
Support Units with Damper-Support Side/Retaining Ring
Support Units-Support Side/Square/Compact
Support Units-Fixed Side/Square/Mounting Hole Narrow Pitch
Support Units-Fixed Side/Square/C-Value
Support Units-Support Side/Round/C-Value
Support Units – Square, Support Side Square Type· Fixed Side Square Type – [ACJF]
Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers’ needs. Please select the right item for your individual usage environment. CHENG JUN is a manufacturer that develops a wide range of linear parts in Taiwan. This bearing has a particular high rating even compared with other bearings and is used in manufacturing lines all over the world. At MISUMI-VONA, we are continuing to develop bearings and support units.
Support Units – Support Side, Round – [FCJF]
Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers’ needs. Please select the right item for your individual usage environment. CHENG JUN is a manufacturer that develops a wide range of linear parts in Taiwan. This bearing has a particular high rating even compared with other bearings and is used in manufacturing lines all over the world. At MISUMI-VONA, we are continuing to develop bearings and support units.
Manufacturing machinery Support Unit for high speed · heavy load Fixed side support unit (round)
Support Units/Square Type/Support Side/Mounting Hole Narrow Pitch
Support Units – Convex Standard – Fixed Side Convex Type – [ECJK]
Support Units – Convex Standard – Support Side Convex Type – [ECJF]
Support Units – Fixed Side, Round – [FCJK]
Lock Nut For Light Load
Lock Nut For High Speed · Heavy Weight
Support Kit for Transport Ball Screw
SUPER LOAD Support Unit on Fixed Side – TFK Type
Support Unit on the Support Side, TFF- Type
EK Series Support Units
[Features]
The HIWIN support unit is comprised of a main body, bearing, cover spacer, oil seal, lock nut, and a bolt with a hex hole. The support unit is used on the support side and the fixed side of each screw shaft, which makes it possible to place the screw shaft in the correct position. The compact size makes it easy to mount and can be used in narrow spaces. Additionally, an adequate amount of grease has already been sealed within the bearing to adjust it to the optimal state for use so that it can immediately be installed on your machine as-is and reduce assembly operation time and improve the assembly accuracy and consistency.
[Special color]
· Combined with a high accuracy, high rigidity angular ball bearing
· The entire surface has received an anti-rust treatment.
· The compact size makes it easy to mount and be used in narrow spaces.
· No additional treatment is required so it can immediately be mounted on equipment as-is.
· Various types and sizes available for selection.
· HIWIN We provide services that are tailored to customer requirements and we can also ship … together with a ball screw.
SUPPORT UNITS – ANGLE TYPE FOR FIXTURE/ EK TYPE
SUPPORT UNITS – ANGLE TYPE FOR SUPPORT/ BF TYPE
SUPPORT UNITS – ANGLE TYPE FOR SUPPORT/ EF TYPE
SUPPORT UNITS – CIRCLE TYPE FOR FIXTURE/ FK TYPE
Hãy là người đầu tiên nhận xét “Support Units – Cụm phụ trợ”
You must be logged in to post a review.