Lubrication, Free Material (Plates) – Dầu bôi trơn, vật liệu tự do (tấm)

Lubrication, Free Material (Plates) – Dầu bôi trơn, vật liệu tự do (tấm)

Material, Plate, #80 (80P)

Can be used oil free and provides superior resistance to load and abrasion.

Material plate glitron F (77P)

Has a low friction coefficient, and does not experience stick slip. Can also be used in a wide range of temperatures from low to high.

Glitron F Skiving Material Sheet (77SH)

[Features]
· Can be used completely oil free.
· The static friction coefficient is low on startup, and stick slip does not occur during operation.
· Even in high-speed conditions, it maintains excellent abrasion resistance and a low friction coefficient.
· Can be used in a wide range of temperatures from low to high.
· Provides excellent chemical resistance and meets the requirements of the Food Sanitation Act of Japan.
· Can be used paired with shafts made of soft metals (aluminum, etc.)
· Provides superior turning workability.
· Various standard product sizes as well as machining use materials are available.

Divest DBB01 slide plate

[Features]
· The bearing is made of plastic materials with excellent properties, one of which is polyacetal resin. This resin is implanted with oleophilic fibers and special fillers in a uniform dispersion. The result is an oil-retaining bearing with self-lubricating properties.
· Can be used completely oil free.
· Can be used with high load and high-speed lateral operations.
· The size and shape are stable, and the thin walls provide a compact design.
· Demonstrates excellent abrasion-resistant properties in roundtrip movement, oscillatory movement, frequent stops and starts, and other operation areas that cause difficulty for oil membrane configurations.
· An abundant variety of standard products such as rolled bushings, thrust bearings, and slide plates is available.
· Compatible with DDK05 dry bearings and DBX01 bearings.

Daidyne DDK05 Slide Plate

A “completely oil free” and “lead-free” plate type environmentally-friendly bearing that operates without any need for lubricant whatsoever. The DDK05 offers low-frictional characteristics due to the use of polytetrafluoroethylene (PTFE) and special filler together with the strength and dimensional stability of a metal backing.

Thermalloy T Type Plate

[Features, cautionary points]
· T-type thermalloy is sold as material. This product cannot be used as is, so please make sure to perform cutting and machining of the inner diameter, outer diameter, and tip surface before using.
· This product is a sintering material. It is not well-suited to shock loads, so please refrain from using it for this application. Please be aware that it also lacks durability for bending loads and pulling loads.
· Regarding chucking when performing machining, there is a possibility the claw part could collapse, so please the minimum required force to fix the product in place when performing chucking.
· Please use sufficient care to manage the blade tip and feed speed when performing machining operations. Please be aware that reckless machining can cause cracks to form in the material.
· If you provide blueprints with instructions for us, we can perform machining for you on-site as well. Please inquire for more information.