Oil Free Washers – Vòng đệm không dầu

Oil Free Washers – Vòng đệm không dầu

Oil Free Washers - Vòng đệm chặn dầu

Oiles ♯500SP Washer (SPW)

High performance characteristics in heavy load and low-speed operating environments.

[Features]
· Can be used in combination with SPB.
· For information about available combinations, refer to SPB. A product with an N symbol at the end of its part number is a no-mounting-hole type

Thrust Washers

Oil Free Copper Alloy Washers

Oiles ♯70 Washer (70W)

Can be used without oil, has a low friction coefficient, and offers superior load withstand ability.

Die Slide Thrust Washer TA series

Two-knuckle pin for CMK2/CMA2/CKV2/JSK2/JSM2, sold separately.

DAIBEST Thrust Washer DBB01 Series

Oil-retaining bearing (thrust washer type) with self-lubricating characteristics.

Dydine Thrust Washer DDK05 series

Compound bearing (thrust washer type) with low friction characteristics and that optimizes metal properties such as strength and dimensional stability.

[Features]
· This environmentally friendly, lead- free, self-lubricating bearing requires no additional lubricant and does not use any lead at all.
· Daidyne DDK05 is a compound bearing that combines a low-friction polytetrafluoroethylene (PTFE) bearing surface with the strength and dimensional stability of a metal backing.
· Bearing surface slides smoothly without lubrication because its dynamic friction coefficient and static friction coefficient are extremely small.
· So-called “StickSlip” does not occur.
· Also safe to use in oil.
· Can be used within a temperature range of -200°C to +280°C.

Oil Free Resin Washers

Oiles LF Washer (LFW)

Can be used without oil, and is thin-walled and lightweight for a more compact size.

Oiles ♯300 Washer (30W)

Excellent oil film retention and superior abrasion/seize resistance can greatly reduce the number of times lubrication is necessary.

Oiles ♯80 Washer (80W)

Can be used without oil, and offers superior load withstand ability and abrasion resistance.

Oiles ♯83 Washer (83W)

Low coefficient of friction and excellent foreign matter resistance.

DAIBEST Thrust Washer DBX01 Series

[Features]
· Pre-lubricated bearing.
· Be sure to fill with lubricant before installing.
· Supplying a small amount of lubricant at predetermined intervals allows the bearing to withstand long term operation.
· The bearing has a structure where bronze in a spherical powdered form is sintered on to the steel backing and polyacetal resin is then impregnated into the surface.
· Operation is quiet, free of squeaking or knocking.
· Low friction characteristics prevents damage to the shaft (mating surface).
· The bearing surface remains virtually wear-free with minimum amount of lubricant (grease or oil).
· The frictional force at startup is extremely low. This enables smooth rotation at startup and at low speed under high load conditions. Superior non-seizure properties.
· Shaft misalignment tolerance is excellent.
· Can withstand impact loads.
· Excellent load-carrying performance is maintained even under oscillating and fretting conditions.