Tensioners – Tăng đưa
Tensioner Unit-Slotted Hole Type/Adjustment Screw Type
Tensioner Unit-Link Bar Type
Slide Plate for Tension
Span box
[Features]
· Uses special resin (material “S”) that has even greater abrasion-resistance and durability that iron in its chain guide.
· Maintenance-free and always automatically maintains the appropriate tension.
· Improves chain drive and performance.
Chain Tensioners/Idler Set
ROSTA tensioner unit option sprocket idler N model
Tensioner Units with Idler-Height Configurable
Auto Slide Tightener
[Features]
· Lightweight and compact tightener that automatically adjusts slack while operating with a compression spring.
· Has a large stroke and powerful tension.
· Works reliably no matter what direction it is set.
· Mounting direction can be changed with bracket AST-1 (sold separately).
· Tension stretching can be performed remarkably easily.
Chain Guide Tensioners
Tight holder THB series
[Features]
· Chain tensioner that can be easily and dramatically adjusted by using an eccentric pin.
· Use of tight holder to increase chain transmission efficiency and chain life is also recommended.
Tight Master TM Series Automatic Tension Tightener
The KANA tight master is a type that uses built-in springs to tighten automatically. Comes with standard idler.
[Features]
· Chain extension induces reduction of transmission efficiency.
· Also, chain and sprocket wear is hastened to shorten life.
· The KANA Tight master is a type that uses built-in springs to tighten automatically. Comes with standard idler
ROSTA tensioner unit with sprocket idler
ROSTA tensioner unit with pulley idler
Flex Holder
[Features]
· Uses Neidhardt rubber springs for unique non-linear spring characteristics.
· Automatically adjusts belt tension.
· Can be easily mounted with 1 bolt (included).
· Rotates 360°, and the position of the idler can be freely adjusted.
· Maximum allowable twist angle is ±32°.
· The operating temperature range is from -42°C to +85°C.
· Material and finishing: Steel, trivalent chromate processing.
Side holder
Flat Spanner
Tension support base. Type that can be adjusted to the optimal position if the serration bolt is loosened. 2 types of idler bolt length are also available
M/HITACHI Snap Idle SI
Remarkably easy to mount, and has a lightweight and compact structure. Extends chain life, reduces noise and vibration reduction, and saves space. Tensioner for chains with a unique structure this is used by suspending it in hollow spaces.
Rosuta tensioner unit option bracket
Tact holder
Angle tightener (fixed type)
Autorotation Tightener
Absorbs shock or vibration with high elasticity.
[Features]
· Usable in both forward and reverse directions.
· Simple structure and use. Absorbs shock or vibration with high elasticity.
· Permanently eliminates problems of noise (no touching parts) and pollution (no lubricant, with little abrasion), and reduces running costs.
· Strong against dirt and highly resistant to water and sunlight.
· Can be used after bolt-mounting to mechanical components.
Swing tightener
Engineering plastic automatic slide tensioner
Tensioner usable even in wet environments where it would come into contact with water or corrosives. Can be used as an automatic chain tightener, automatic belt tightener, shock absorber material or decelerator.
[Features]
· Also usable in wet environments where it would come into contact with water or corrosives.
· Can be used as an automatic chain tightener, automatic belt tightener and shock absorber equipment.
· Regularly maintains the drive of the chain and belt, and absorbs shock to add years to the life of other structural components.
· Includes precompression system to simplify mounting work
Offset Brackets
Auto Swing Tightener
Roller ring
Tensioner that clamped onto chains. Automatically adds tension to drive chains, absorbs vibration, and provides smooth rotation.
[Features]
· The roll ring is a drive tensioner for chains created based on a new concept.
· Automatically adds tension to drive chains, absorbs vibration, and provides smooth rotation.
· Designed based on rotation principles and elasticity principles, so it maintains smooth chain drive with little tension force.
· Differs from conventional pensioners in that mounting stays and flanges are not required, nor is any machining of screw holes and the like.
· Can be mounted by hand in a few seconds, with no tools required. Can also be adjusted after mounting.
· Made from high-performance elastic materials. Absorbs chain vibration and provides smooth rotation, reducing noise and improving drive mechanism life without damaging chains, sprockets, springs, etc.
· Absolutely no lubrication or other such maintenance required.
· Can handle both forward and reverse drive directions.
· Can be mounted in both vertical and horizontal directions.
· Usable in a wide range of temperatures. Can also be used in places exposed to water and dusty places, so it is usable for machinery in any field.
Straight tightener, Crank tightener
Screw adjustment type tightener
Aluminum Spanner
Stand Spanner
Tension support base. Type that can be adjusted to the optimal position if the serration bolt is loosened. 2 types of stand spanner with different shaft heights are available. 2 types of idler bolt length are also available.
Hãy là người đầu tiên nhận xét “Tensioners – Tăng đưa”
You must be logged in to post a review.