Universal Joints – Khớp nối tổng thể
Universal Joints - Khớp nối tổng thể
Flexible Coupling (SFC Series)
BD Standard Type and Reinforced Type
[Features]
· High torque normal use.
· Material: S45C
· Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.
Universal Joints – Set Pin
Universal Joints/Rubber Cover-Single Type/Double Type
With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model
Standard type, strength type B
[Features]
· Holes for spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, the spring pins are not included.
Cross Joint Coupling (SCJ Series)
Standard type wear resistant HJ type
[Features]
· With total hardening treatment for increased fatigue strength.
· Additional machining cannot be performed on the hardened product.
· To extend life, boots and oil pack should be used.
· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
· With key groove processing, the strong pins and joint pins are not included.
Standard type wear resistant type HJD
Paraflex CPE· CPU Model
High rigidity with high precision pin and dry metal to minimize backlash.
[Features]
· The rigidity of each component is very high, and backlash extremely small due to high precision pin and dry metal.
· As it is universal type, the shaft reaction force due to installation error is extremely small.
· With damping effect due to sliding friction surface of pin and dry metal.
· Conforms to “RoHS” EU Directive, prohibiting the use of 6 hazardous chemical substances such as mercury and lead.
Precision shaft fitting correction type UA-C series
Standard Bearing Model, K Model
Standard Bearing Model, KD Model
Standard type, corrosion resistant type, MS type and MSS type
Joint slide SPS series
Shaft type spline, shaft joint, precise type H-P
Shaft type spline, shaft type joint, stainless type HS-P
Flex shaft (without tube)
Flex Bearing (Ball Bearing Type)
Grooved Pin for Clevis EA953BA-12
Universal Double Joint EA966CJ-10
【Product Specifications】
・Double function type of EA966CH-6 to -25
・As the product does not need a middle shaft, it can be installed in a narrower area.
・For power transmission of conveyors, industrial machines, etc.
・Material-Steel
・ID…10mm
・Length…71mm
・Torque…29.4Nm
Standard Type, Non Magnetic Corrosion Resistant Type – BR Type
Joint slid GX series
Joint slide SPSS series
Rod End Y Type
Attached axis type Miniature type M-L type
Type with Shaft Bearing Type KL Type, KF Type, KFD Type
Plastic universal joint MC series
Plastic universal joint MCM series
Large plastic universal joint MD series
[Inch] Clevis Pin Set EA949R-15
Hãy là người đầu tiên nhận xét “Universal Joints – Khớp nối tổng thể”
You must be logged in to post a review.