Hơn 100.000 sản phẩm chưa được cập nhật trên website. Hãy liên hệ trực tiếp với chúng tôi nếu bạn vẫn chưa tìm được sản phẩm cần mua
Hỗ trợ mua hàng:
ABB ACS350 230V AC Inverter Drive
ABB ACS350 AC Frequency Inverter for 0.37kW (0.5HP):
ABB ACS350 AC Frequency Inverter for 0.37kW (0.5HP) 230V 3 Ph motor in VxF or Vector control to 2.4A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
R0 Size – 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm) IP20 case.
Overload – 150% x 60seconds.
Speed Control Range – 0/500Hz.
Braking – To 100 Ohm minimum external resistor (not supplied) – use the ‘Which Resistor’ button on this page.
Features – Basic Keypad, 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters to EN61800-3 to the 2nd Environment (Industrial).
Input Current – 6.1A.
Input Voltage – 200/240V single phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm.
Heat Loss at max output – 22.7W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Full part number is – ACS350-01E-02A4-2+J404, ACS350-01E-02A4-2
ABB ACS350 AC Frequency Inverter for 0.75kW (1HP):
ABB ACS350 AC Frequency Inverter for 0.75kW (1HP) 230V 3 Ph motor in VxF or Vector control to 4.7A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
No Keypad included – see linked products below for ACS 350 equivalent with Keypad.
The ACS350 range does not include a 0.55kW 1ph 230V model so this 0.75kW rated model can be used as a 0.55kW unit.
R1 Size – 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm) IP20 case.
Overload – 150% x 60seconds.
Speed Control Range – 0/500Hz.
Braking – To 56 Ohm minimum external resistor (not supplied) – use the ‘Which Resistor’ button on this page.
Features – 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters to EN61800-3 to the 2nd Environment (Industrial).
Input Current – 11.4A.
Input Voltage – 200/240V single phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side).
Heat Loss at max output – 26.4W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Full part number is – ACS350-01E-04A7-2, ACS350-01E-04A7-2+J404
ABB ACS350 AC Frequency Inverter for 1.5kW (2HP):
ABB ACS350 AC Frequency Inverter for 1.5kW (2HP) 230V 3 Ph motor in VxF or Vector control to 7.5A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
No Keypad included – see linked products below for ACS 350 equivalent with Keypad.
R2 Size – 105mm Wide x 165mm Deep x 202mm high (plus cable clamp plate at 37mm) IP20 case.
Overload – 150% x 60seconds.
Speed Control Range – 0/500Hz.
Braking – To 56 Ohm minimum external resistor (not supplied) – use the ‘Which Resistor’ button on this page.
Features – 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters to EN61800-3 to the 2nd Environment (Industrial).
Input Current – 16.8A.
Input Voltage – 200/240V single phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side).
Heat Loss at max output – 27.5W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Full part number is – ACS350-01E-07A5-2, ACS350-01E-07A5-2+J404
ABB ACS350 AC Frequency Inverter for 2.2kW (3HP):
ABB ACS350 AC Frequency Inverter for 2.2kW (3HP) 230V 3 Ph motor in VxF or Vector control to 9.8A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
No Keypad included – see linked products below for ACS 350 equivalent with Keypad.
R2 Size – 105mm Wide x 165mm Deep x 202mm high (plus cable clamp plate at 37mm) IP20 case.
Overload – 150% x 60seconds.
Speed Control Range – 0/500Hz.
Braking – To 56 Ohm minimum external resistor (not supplied) – use the ‘Which Resistor’ button on this page.
Features – 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters to EN61800-3 to the 2nd Environment (Industrial).
Input Current – 21.0A.
Input Voltage – 200/240V single phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side).
Heat Loss at max output – 27.5W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Full part number is – ACS350-01E-09A8-2, ACS350-03E-09A8-2
Đánh giá
Chưa có đánh giá nào.