Clutches, Brakes – Li hợp, phanh động cơ

Clutches, Brakes – Li hợp, phanh động cơ

Clutches, Brakes - Li hợp, phanh động cơ

Excitation operational type clutch

A clutch that is compatible with all types of general industrial machinery. The logical design provides an exceptional durability and level for all of the performance such as torque properties and responsiveness required for the clutch.

Warner series through shaft type clutch

SINFONIA TECHNOLOGY

[Features]
· A dry type plate electromagnetic clutch with high responsiveness, high accuracy, high reliability, long life, and low energy consumption
· No need to adjust after mounting
· Highly responsive and highly accurate on / Off
· Easy to mount on a shaft
· Excellent heat dissipation
· Ideal high frequency operation

Thin-type series clutch without hub

[Features]
· A dry type plate electromagnetic clutch with high responsiveness, high accuracy, high reliability, long life, and low energy consumption.
· Ultra-thin, compact, and high performance plate spring driving type
· Zero backlash
· Excellent responsiveness, and can be freely mounted at any posture
· Highly reliable clover type plate spring

Micro Spring-actuated-type-permanent-magnet-actuated brake (for retention and braking)

Uses special friction materials to guarantee an initial rated torque of 100% and does not require any warming up prior to operation. The friction materials have excellent heat resistance which can achieve increase torque stability. (Hold / Emergency brake type)

Micro Electromagnetic Clutch

Micro Electromagnetic Actuated Type Clutch

A micro clutch that is ideal for compact precision devices such as office equipment, transmission devices, and vehicle devices that cannot accommodate variation in responsiveness or torque.

[Features]
· Comes with many different types to mount on any location.
· Compact, lightweight, and easy to mount and use.
· There are two types of stators. A flange mounting type that can effectively utilize space, and a bearing mounting type that can be easily set on a shaft.
· Can select from six different types based on the mounting conditions by combining this with three different types of mounting type armature assemblies (direct mounting type, shaft mounting type).
· Conforms to the “RoHS Directive” relating to the EU’s harmful chemical substance regulation which prohibits the use of 6 substances like mercury and lead.

Dry Type Single Disc Electromagnetic Brake, MS Series

Dry Type Single Plate Electromagnetic Clutch (For Engine)

A special spring has been used to allow it to withstand use in harsh environments where there is vibration, shock, and torque fluctuation. The surface has been baking coated, and the ball bearings use a special grease and rubber seal which proves them with excellent anti-rust properties and allows them to be used in areas with high ambient temperatures.

Excitation-actuated Brake

A brake that is compatible with all types of general industrial machinery. The logical design that is powerful in withstanding sudden load stops and has an exceptional level for all of the performance such as torque properties and responsiveness required for the brake.

[Features]
· A brake with a thin design.
· Has the same exceptional performance as the clutch, particularly exceptional responsiveness, and is powerful in withstanding sudden load stops.
· You can select a model that has a shape that matches the mounting area and it is lightweight, which makes it easy to install on any device.
· There are three differing types of mounting shapes for armature assembly so that you can select the most appropriate one.
· Conforms to the “RoHS Directive” relating to the EU’s harmful chemical substance regulation which prohibits the use of 6 substances like mercury and lead

Power Source Equipment

A power supply device that was developed for the purpose of achieving sufficient performance for a group of Miki pulley electromagnetic clutch and brake products. Can select the optimal power supply device in accordance with the application.

[Features]
· The BES model is a compact, high capacity over excitation power supply device that can be used all types of electromagnetic clutches and brakes that have a rated voltage of DC24V / 45V / 90V
· A power supply device that applies instant over-voltage to the rated excited voltage of the clutch and brake, and improves the torque rising time and the armature suction time to achieve an even greater torque.
· This makes it possible to achieve high frequency operations and perform operations at a high accuracy for various machinery and devices.
· All of the circuits are non-contact which allows them to be contact and lightweight.
· A sequencer, etc. can be used for direct control which is convenient.
· Conforms to the “RoHS Directive” relating to the EU’s harmful chemical substance regulation which prohibits the use of 6 substances like mercury and lead.
· Conforms to the EC Directive by using an optional set that conforms to the EMC Directive.
· BEM model is a compact power supply device for non-excited electromagnetic brakes, that has a rated voltage of DC45/90/180V.
· By simply connecting or inputting any voltage (AC100V, AC200V, AC400V), the direct current voltage required to operate the electromagnetic clutch/break will be supplied.
· The entire case has been molded using resin which allows for use even in atmosphere with powder and dust.
· It is also compact and lightweight.
· A lead wire input / output type that is suited for relay connections.
· Conforms to the “RoHS Directive” relating to the EU’s harmful chemical substance regulation which prohibits the use of 6 substances like mercury and lead

Micro Electromagnetic Brake

Electromagnetic tooth clutch

Warner series brake

Micro Series Micro Clutch

[Features]
· A dry type plate electromagnetic clutch with high responsiveness, high accuracy, high reliability, long life, and low energy consumption
· Ultra-compact type that has high responsiveness
· High heat dissipation properties, and can be used for high frequency operation

Micro Spring-actuated-type-permanent-magnet-actuated brake (for retention and emergency stop)

Uses special friction materials to guarantee an initial rated torque of 100% and does not require any warming up prior to operation. The friction materials have excellent heat resistance which can achieve increase torque stability. (Hold / Emergency brake type)

Micro Spring-actuated-type-permanent-magnet-actuated brake (for braking)

Uses special friction materials to guarantee an initial rated torque of 100% and does not require any warming up prior to operation. The friction materials have excellent heat resistance which can achieve increase torque stability. (Hold / Emergency brake type)

Dry Type Single Disk Electromagnetic Clutch, MS Series

Electromagnetic Clutch and Brake Unit

Magnetic Torque Limiter

Micro Electromagnetic Clutch Pack

Hysteresis Brake

Fixed Current Controller

The powder and hysteresis type clutch and brake run based on energization, so the torque will fluctuate if the current values fluctuate when using general low voltage controls. The constant current controls require resistance values to be set for the load that is connect to the controller.

Dry Type Single Disc Electromagnetic Clutch, V Series

Warner Series Butt Shaft Type Clutch

[Features]
· A dry type plate electromagnetic clutch with high responsiveness, high accuracy, high reliability, long life, and low energy consumption
· No need to adjust after mounting
· Highly responsive and highly accurate on / Off
· Easy to mount on a shaft
· Excellent heat dissipation
· Ideal high frequency operation

Warner series arm hold type brake unit

Powder series micro type clutch

[Features]
· This unique ideal powder and new structural design achieves precise control of the torque transmission over a wide range, precise proportional control over a wide range, stable constant torque properties, non-shock connection, braking functionality, smooth continuous slip properties, ideal for high frequency operation, long life, and no wear debris

Powder series natural cooling type brake POB

[Features]
· This unique ideal powder and new structural design achieves precise control of the torque transmission over a wide range, precise proportional control over a wide range, stable constant torque properties, non-shock connection, braking functionality, smooth continuous slip properties, ideal for high frequency operation, long life, and no wear debris

Miniature Slip Clutch MSC- Standard Type

Wet Type Multi-disc Electromagnetic Brake

Has the highest torque and smallest length and outer diameter compared with other similar type products. Compact insertion space to aim for a more reasonable mechanical design. Can withstand harsh use and has a work tolerance due to the appropriate lubrication method and oil amount.

Coupling for MDC and MWC

Non-Excitation Operation Type Brakes

This is an electromagnetic brake that actuates using spring power when there is no energization, which demonstrates excellent performance in rapid braking during power outages, retaining the stop setting over long periods of time, and prevents machinery from moving based on inertia.

[Features]
<457 model: for braking (produce based on orders received)>
· Compact, lightweight brake that is dedicated for braking.
· Uses a system with outside mounted stators that are not easily affected by the heat generated from the coil.
· Conforms to the “RoHS Directive” relating to the EU’s harmful chemical substance regulation which prohibits the use of 6 substances like mercury and lead.
<458 Model: Dual use braking and holding>
· A long life and high torque break optimal for dual use braking and holding.
· A unique, special armature has been used to reduce high frequency friction noise that occurs during braking and is otherwise hard on the ears.
· The torque adjustment ring can be turned to adjust the braking torque over a wide range.
· A minimum torque can be secured by using a double braking structure.
· The braking power can be released by pulling the manual release lever even when using the braking or retaining settings.
· Can even be used in poor environment by attaching a rubber duct cover.

Selcab series through shaft type clutch

PTB type series heat pipe cooling brake

[Features]
· Functionality to dissipate heat that threatens to exceed the cooling system ⇒ Uses a high capacity fan and a special air flow to create a heat pipe effect to achieves functionality to dissipate heat that exceeds cooling system, high reliability, high efficient new heat pipe ⇒ Good stability of hydraulic fluid, very good heat transmission efficiency, compact with high cost performance ⇒ Does not require any pipes and cooling sources. Greatly reduces operational costs, and easy to mount POB type and has compatibility ⇒ Installation only requires simple electrical wiring. POB Same dimensions as this series, spherical powder properties, excellent long life ⇒ High accuracy and stable torque properties, and has long life even under harsh operation conditions

Electromagnetic clutch/brake control equipment

[Features]
· The EMP control device is a non-contact type control device used for electromagnetic clutches and brakes.
· This control device uses a time lag circuit and double the over-excitation to achieve an extremely stable operation in cases where high accuracy is demanded at a high frequency.
· Additionally, this type of circuit configuration is a completely non-contact type system, that uses power transistors to achieve an extremely long life and high performance.

Magnetic clutch/brake tension control device PCM

A control device that allows the user to manually alter the torque over a wide range using the volume if the disc surface.

[Features]
· Can control a wide range of torque: The torque can be manually set over a wide range, and this can be used for torque limiter application with a large range of torque adjustment.
· Ease to use and operate: The voltage can be freely adjusted while looking at the voltage indicator and the ideal torque can be set.

Magnetic clutch/brake power source device PS

A dedicated power supply device that controls the torque from the load on the powder clutch and brake using either constant voltage or constant current.

[Features]
· Can control a wide range of torque: The torque can be manually set over a wide range, and this can be used for torque limiter application with a large range of torque adjustment.
· Ease to use and operate: The voltage can be freely adjusted while looking at the voltage indicator and the ideal torque can be set.

Electromagnetic Clutch/Brake Non-Contact Controller TMP Type

Miniature Slip Clutch MSC-CL Type

Miniature Slip Clutch MSC-SP Type

Tension Controller for Feedback

Compares the set values with the tensile strength measured by the tensile strength detector and then eliminates any differences by adding torque (current value) to the powder or hysteresis type clutch, which allows it to suppress fluctuation in tensile strength resulting from reel diameter or disturbances.

Pulse Count Type Tension Controller

Calculates the reel diameter based on pulse signal input to control so that the diameter fluctuation estimation will remain constant, which makes it possible to suppress fluctuation in tensile strength that would otherwise be caused by the reel diameter. The control output performs constant power controls so that there will be no effect from the rising coil temperature and to obtain a consistent tensile strength.

Digital Setting Constant Current Controller

Wet Type Electromagnet Tooth Clutch

Pneumatic Clutch Brake

The ACSB type dry type multi plate air pressure clutch and brake is comprised of two parts and has a structure where a clutch that actuates (operates together) when pressurized air is fed has been combined and integrated together with a negative actuation (spring close type) brake that operates and releases together with this clutch.